Install a factory-look shark fin antenna in about 60 seconds while preserving radio and navigation signals. The shark fin replaces your stock whip with a sleek roofline that mirrors premium German hatches and Japanese sport sedans. Inside the carbon-fiber finish ABS shell sits a copper signal core wired into your car's existing antenna lead, so FM, AM, DAB, and GPS stay clear while the old bent stick goes in the bin. Peel, plug, press—no drilling, no body-shop quotes.
Its shell delivers a refined look with either a carbon-weave texture in Black Carbon or a factory-smooth gloss in Intense Black, Ivory White, or Metallic Gray—four colors chosen to blend with your paint rather than read as a generic topper.
Unlike hollow plastic toppers, this fin houses a copper signal core that runs down into the base and plugs into the same connector your stock whip used. That means FM, AM, DAB, and GPS pass through to the head unit as they did before. The shell is solid ABS with either a carbon weave finish or an automotive-grade gloss, sealed at the base with a waterproof gasket, so it stays secured at highway speed and sheds water without chalking or fading.
The installation is designed to endure real-world driving: a pre-applied adhesive on a waterproof rubber gasket grips a clean roof and resists the rigors of car washes, brush-style washes, winter grit, and high-speed runs.
Three-Step, About 60 Seconds
- Unscrew or pull off your existing whip antenna. The mounting hole stays—no drilling, no patching.
- Plug SkyRazor's copper signal lead into the connector under your headliner trim—the same one your factory whip used.
- Peel the adhesive backing, line the fin up with the roof line, and press down firmly for 30 seconds.
| SkyRazor Shark Fin | Stock Whip Antenna | Cheap Aftermarket Fins |
|---|---|---|
| ✅ Copper signal core wired into your factory antenna lead — FM, AM, DAB & GPS keep working | ❌ Works, but bent, sun-faded, and looks 15 years old | ❌ Hollow plastic toppers — looks change, reception drops |
| ✅ Four paint-match colors with real carbon weave or factory gloss finish | ❌ Generic black plastic stick — same on every economy car | ❌ Glossy black only, no carbon, no color match |
| ✅ 60-second peel-stick on the existing antenna mount with plug-and-play connector | ❌ Replacement usually means a body shop quote | ❌ Weak 3M tape that lifts in the first car wash |
Specifications
- Dimensions: 17 cm long × 7 cm wide × 7 cm tall (6.69" × 2.76" × 2.76")
- Material: Solid ABS shell with carbon weave or automotive-grade gloss finish; waterproof rubber base gasket
- Colors: Black Carbon, Intense Black, Ivory White, Metallic Gray
- Signal Support: FM, AM, DAB & GPS via internal copper signal core wired to your factory antenna lead
- Fit: Universal — replaces the standard whip antenna on sedans, hatches, SUVs, and most trucks
- Installation: Tool-free peel-and-stick base, plug-in cable connector, no drilling
Questions & Answers
- Will it actually fit my car? If your car has a removable whip antenna on the rear of the roof, it mounts to the standard antenna hole used by most sedans, hatches, SUVs, and trucks built in the last 20 years.
- Does the reception actually work, or is it just a decorative cover? Real—The internal copper signal wire plugs into the same antenna connector your factory whip used. FM, AM, DAB, and GPS pass through the head unit the same as before.
- Will the adhesive lift in an automatic car wash? No—if the roof is properly cleaned and dried before install. The gasket and adhesive grip through brush washes, jet sprays, snow, and 80+ mph drives without lifting.
- How well does the color match my paint? Choose from Black Carbon, Intense Black, Ivory White, or Metallic Gray. The carbon weave matches sport trims; the gloss colors closely approximate common automotive paint codes so most people assume factory.
- Will it fade or chalk in the sun? The ABS shell uses UV-resistant pigments and a sealed finish, so it won't chalk or peel like uncoated toppers after sun exposure.
If the SkyRazor does not sit on your roof like an OEM part—or if your reception drops compared to your old whip—peel it off and return it for a full refund.
