StreamMaster Pro turns any standard faucet into a versatile rinsing station with two flow modes—soft bubble aeration for delicate rinsing and a high-pressure spray for stubborn residue—while its 360° swiveling ball joint and up to 80° of tilt let you target every corner of the sink. Inside the solid copper body, a four-layer filtration system sits to trap sediment before it hits your dishes.
Tool-free installation is simple: it threads onto a standard 7/8-inch faucet, common on most US sinks, and can be hand-screwed on in under a minute.
Switch between modes by twisting the bottom collar: a soft, bubble aerator for rinsing hands, glasses, and delicate produce, or a tighter, high-pressure spray for tough grime.
Designed for reach, the top ball joint pivots full 360° and tilts up to 80°, letting you reach the back of a deep sink, rim a pot, or fill a tall bottle without repositioning the faucet.
The four-layer mesh inside combines three stainless wire grids with a fine particle screen to catch sediment and rust flakes before water hits your plates or glass.
Material and fit details: Solid copper body with a chrome finish resists rust and mineral scale; thread is 7/8-inch female, fitting the standard kitchen faucet thread used on most US sinks. A rubber gasket creates a watertight seal when hand-tightened; if drips occur, reseat the gasket and re-tighten.
Availability: StreamMaster Pro is offered as a single unit or a two-pack to cover multiple sinks.
- Unscrew your existing aerator by hand.
- Screw StreamMaster Pro onto the faucet in its place; it fits standard 7/8-inch threaded faucets found on most US sinks.
- Twist the bottom collar to switch between soft bubble flow and high-pressure spray.
- Push the head to aim—the 360° ball-joint lets it orient anywhere, up to 80° in any direction.