StoneVive removes embedded outdoor stains from porous surfaces by soaking into the stone itself rather than scraping the top layer. Rust streaks, rain marks, oxidation, and mineral buildup that have settled deep inside the material lift out when the solution is rinsed away after soaking.
Traditional methods such as pressure washing, bleach, or wire brushing damage the surface and allow stains to return after the next rainfall. StoneVive works without abrasion or harsh chemicals, leaving the stone intact while the biodegradable formula breaks the bond between the stain and the pores inside.
The product treats granite, marble, slate, limestone, and concrete. It can be used on patios, driveways, steps, and garden walls both indoors and outdoors. One 3.4 fl oz bottle covers up to 1,076 sq ft once diluted.
Dilution and application
Mix 3.4 fl oz of StoneVive with 33.8 fl oz of water in a watering can or sprayer. Apply the solution evenly over the stained area and allow it to soak. Rinse thoroughly with a hose; loosened stains flow away with the water. No brushes or protective equipment are required.
Comparison with other methods
| StoneVive™ | Bleach & Scrub | Pressure Washing |
|---|---|---|
| Safe around kids, pets & lawn | ❌ | ❌ |
| Lifts rust, oxidation & weather stains from inside the stone | ❌ | ❌ |
| Pour-and-rinse — no scrubbing, no equipment to rent | ❌ | ❌ |
The formula contains no chlorine and produces no noticeable fumes. It remains effective on delicate stones without causing abrasion damage. For outdoor high-traffic areas, reapply every few months to maintain appearance; indoor surfaces typically require less frequent treatment.
